Table of Contents
Advertisement
Figure 97. Extra cord length during routing
4. With the cable guide arm assembly perpendicular to the system unit, continue to
94
SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Planning, Installation, and Operation Guide
Tip for routing the mouse, keyboard, and printer cables
When routing these cables, allow extra length at the connector end by
forming a loop (see Figure 97) before continuing with the cable into the
cable guide. This extra length prevents undue strain on the connector.
route the cable along the outside of the cable guide arm assembly, closing the
Velcro strips where appropriate to secure.
Note: Do not plug the power cord into the receptacle at this time, or attach the
cables to the devices.
Updated October 31, 2007
Advertisement
Table of Contents
