Checking System Status - Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual

Checking System Status

At the command-line prompt, enter the following line:
3.
<server_root>/cert-<instance_id>/restart-cert[.bat]
When prompted, enter the single sign-on password.
4.
Certificate Management System won't restart until you provide this password.
For more information, see "Required Start-up Information" on page 312.
Checking System Status
You can use Netscape Console to find out whether a particular instance of
Certificate Management System is running.
Log in to Netscape Console (see "Logging In to Netscape Console" on
1.
page 336).
In the Console tab, select the instance that corresponds to the CMS instance
2.
you want to check.
324 Netscape Certificate Management System Installation and Setup Guide • October 2001
specifies the file extension; this is required only when running the
.bat
utility on a Windows NT system.
is the directory where the CMS binaries are kept. You first
<server_root>
specified this directory during installation.
is the ID for this instance of Certificate Management
<instance_id>
System. You first specified this when you installed this server.