Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual page 428

Setting Up Privileged Users
In the "List of connectors" select Data Recovery Manager Connector and click
4.
Edit.
The Edit Connector dialog box appears.
Select the Enable checkbox to the enable the connector configuration.
5.
Select Remote, and enter the appropriate information:
6.
Host. Type the full host name of the Data Recovery Manager that trusts this
Certificate Manager. The Certificate Manager uses this name to locate the Data
Recovery Manager. The format for the host name must be in the
<
Port. Type the number of the TCP/IP port at which the Data Recovery
Manager will listen to requests from the trusted Certificate Manager. The port
designated for communication between a trusted Certificate Manager and a
Data Recovery Manager is the agent port. See "Agent Port" on page 373.
Timeout. Connection timeout. By default, it is 30 seconds.
The sample screen above shows how to connect the Certificate Manager to a
Data Recovery Manager running on a host called
listening for HTTPS requests at port
Click OK.
7.
You are returned to the Connectors tab.
To save your changes, click Save.
8.
The CMS configuration is modified. If the changes you made require you to
restart the server, you will be prompted accordingly. In that case, stop and
restart the server.
428 Netscape Certificate Management System Installation and Setup Guide • October 2001
machine_name>.<your_domain>.<domain>
form.
testKRA.siroe.com
.
8000