Restarting From The Command Line; Checking System Status - Netscape MANAGEMENT SYSTEM 6.01 Installation And Setup Manual

Checking System Status

Restarting From the Command Line

To restart Certificate Management System from the command line:
Open a terminal window to your server.
1.
In a Unix system, log in either as
2.
is how you started the server).
At the command-line prompt, enter the following line:
3.
<server_root>/cert-<instance_id>/restart-cert[.bat]
Checking System Status
You can use Netscape Console to find out whether a particular instance of
Certificate Management System is running.
Log in to Netscape Console (see "Logging In to Netscape Console" on
1.
page 326).
In the Console tab, select the instance that corresponds to the CMS instance
2.
you want to check.
314 Netscape Certificate Management System Installation and Setup Guide • May 2002
specifies the file extension; this is required only when running the
.bat
utility on a Windows system.
or using the server's user account (if that
root