Step 6. Restart The Server; Step 7. Test Policy Configuration; Step A. Enroll For A Certificate - Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual
Hide thumbs
Also See for NETSCAPE MANAGEMENT SYSTEM 4.5:
Table of Contents
Advertisement
Configuring Policy Rules for a Subsystem
To change the order of a rule, select it in the list and click the Up or Down
2.
button, as appropriate.
Keep in mind that the server executes the rules on a first-come-first-served
basis, overwriting the configuration determined by the previous rule, if any.
When you have the correct order, click OK.
3.
You are returned to the Policy Rules Management tab.
To view the updated configuration, click Refresh.
4.
Step 6. Restart the Server
This step is required only if you were prompted to restart the server in any of the
previous steps.
To restart the server from the CMS window:
Click the Tasks tab
1.
Click Restart the Server.
2.
Step 7. Test Policy Configuration
To make sure that you've configured the server correctly, request a certificate and
check the certificate for details such as for validity period, key type and size, and
extensions.
•
Step A. Enroll for a Certificate
•
Step B. Approve the Request
•
Step C. Check the Certificate Details
Step A. Enroll for a Certificate
The steps outlined below explain how to request a personal certificate from the
Certificate Manager using the manual enrollment method. If you've configured the
Certificate Manager for automated certificate issuance, for example the
directory-based enrollment, you can use the appropriate form and request a
certificate.
600
Netscape Certificate Management System Installation and Setup Guide • October 2001
Advertisement
Table of Contents
