Installing The Default Demo; Step 1. Run The Installation Script - Unix - Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual

Installing the Default Demo

<single-signon
password>
Installing the Default Demo
The installation script installs and starts an Administration Server and a Directory
Server; the process is slightly different for Windows NT and UNIX systems. The
Installation Wizard, which is the same on both systems, installs Certificate
Management System itself and creates the system's certificates. When you have
finished installing the files, you start Certificate Management System and enroll for
the initial administrator-agent certificate, which you then use to verify that the
system is properly installed and functions correctly.
The steps of this installation procedure are described in the following sections:
• Step 1. Run the Installation Script — UNIX or
Step 1. Run the Installation Script—Windows NT
• Step 2. Run the Installation Wizard
• Step 3. Get the First User Certificate
Step 1. Run the Installation Script — UNIX
These instructions assume that you have the initial distribution of Certificate
Management System available, either on a CD or on your hard disk.
If you are using a Windows NT system, see "Step 1. Run the Installation
Script—Windows NT" on page 114.
To run the installation script, change to the distribution directory (where you have
downloaded the distribution files) and execute the file
In the instructions that follow, the question that appears at the bottom of each
setup screen is in boldface, followed by the action you should take.
Would you like to continue with setup? [Yes]: Press Enter.
1.
Do you agree to the license terms? [No]: Type
2.
Select the items you would like to install [1]: Press Enter.
3.
112 Netscape Certificate Management System Installation and Setup Guide • October 2001
This password protects the <intdb password> and
<token password>. Use this password to start
Certificate Management System.
.
setup
and press Enter.
yes