Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual page 233

Click Next to submit the request.
c.
The Certificate Request Result screen appears, confirming that the request
has been submitted. Note the request ID provided in the response
message. (You can use it later to retrieve the certificate, once it has been
issued, from the end-entity port.)
Note that the request you submitted gets added to the agent queue of the
remote Certificate Manager for approval by that Certificate Manager's
agent. If you've permission to access that Certificate Manager's Agent
interface, you can follow the instructions below to issue the certificate.
Otherwise, you should wait for the other agent to approve your request
and issue the certificate.
Open a web browser window.
d.
Enter the URL for the remote Certificate Manager's Agent Services page.
e.
(You must use the same computer where you got your agent certificate.)
Select List Requests, then click Show Pending Requests and click Find. The
f.
pending request list is displayed.
Locate your request, click Details to see it, and make any changes. Then,
g.
scroll down to the bottom of the form and click Do It.
After the certificate is generated, click Show Certificate.
h.
When the certificate is displayed, scroll down to the base-64 encoded
i.
version of the certificate, highlight all the text (including
CERTIFICATE -----
the clipboard or to a text file.
Be sure to not make any changes to the certificate. You're required to paste
the encoded certificate into the Installation Wizard screen next. So, once
you've copied the certificate, go back to the wizard screen (Step 13).
To submit your certificate request manually to a remote Certificate Manager,
follow these steps:
Open a web browser window.
a.
Go to the end-entity URL for the remote Certificate Manager that will issue
b.
the subordinate CA's signing certificate.
For example, if you assigned the port number 17006 to the non-SSL
end-entity port for your root CA, you would go to the URL
http://<hostname>:17006
end entities.
and
-----END CERTIFICATE-----
to bring up the Certificate Manager page for
Chapter 6 Installing Certificate Management System
Stage 2. Running the Installation Wizard
-----BEGIN
), and copy it to
233