Step 4. Enable Certificate Manager's Ocsp Service - Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual

Step 4. Enable Certificate Manager's OCSP
Service
During the installation of a Certificate Manager, you are given an opportunity to
specify whether you want to enable Certificate Manager's OCSP service. If you
chose to enable it, you just need to verify that the OCSP service is still on. If you
chose to keep the service disabled, you need to follow the instructions below and
enable the service.
To enable a Certificate Manager's OCSP service:
In the navigation tree, select Certificate Manager.
1.
The General Setting tab appears.
In the Web Access section, select the "OCSP Service" option. Leave all the other
2.
selections as they are or make changes that you deem necessary; see "Step 6.
Enable End-Entity Interaction" on page 539.
To save your changes, click Save.
3.
The CMS configuration is modified. If the changes you made require you to
restart the server, you will be prompted accordingly. Don't restart the server
yet; you can do that after you've made all the changes.
Setting Up a Certificate Manager with OCSP Service
Chapter 21 Setting Up an OCSP Responder 699