Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual page 378

Configuring Port Numbers
Add the IP address or the host name or interface name as the value for the
4.
parameter you just added. For example,
If necessary, repeat step 4 for the other ports.
5.
Save your changes, and close the configuration file.
6.
Start the CMS instance; see "Starting Certificate Management System" on
7.
page 312.
378 Netscape Certificate Management System Installation and Setup Guide • October 2001
If you entered an IP address as the value, the parameter would look similar
to this:
radm.https.host=197.1.137.98
If you entered the host name as the value, the parameter would look
similar to this:
radm.https.host=cert.siroe.com