Step 7. Test Your Configuration; Managing Job Plug-In Modules - Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual

Identify the mail server by providing the following details:
2.
Server name. Make sure the field shows the correct host name for your mail
server. Otherwise, type the full host name of the machine on which your mail
server is installed. Certificate Management System uses this name to access the
mail server. The format for the host name is as follows:
<machine_name>.<your_domain>.<domain>
By default, the host name of the mail server is shown as
the actual host name (for example,
Port number. Make sure that the field shows the correct port number at which
the mail server is listening for requests. Otherwise type the port number.
To save your changes, click Save.
3.
The CMS configuration is modified. If the changes you made require you to
restart the server, you will be prompted accordingly. In that case, restart the
server.

Step 7. Test Your Configuration

• Change the email addresses in the notification configuration to your email
address.
• Go to the end-entity interface and request a certificate using the manual
enrollment form. When the request gets queued for agent approval, you
should get notified. Check the message to see if has the correct information.
Otherwise, correct the message template.
• Next, login to the agent interface and approve the request. Whren the server
issues a certificate, you should get a notification.

Managing Job Plug-in Modules

This section explains how to use the CMS window to perform the following
operations:
• Registering a Job Module
• Deleting a Job Module
).
mail.siroe.com
Chapter 17 Scheduling Automated Jobs
Managing Job Plug-in Modules
instead of
localhost
575