Table of Contents
Advertisement
Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
3.10. Adding a Cluster Service to the Cluster
To add a cluster service to the cluster, follow these steps:
1. At the left frame, click Services.
2. At the bottom of the right frame (labeled Properties), click the Create a Service
button. Clicking Create a Service causes the Add a Service dialog box to be dis-
played.
3. At the Add a Service dialog box, type the name of the service in the Name text
box and click OK. Clicking OK causes the Service Management dialog box to be
displayed (refer to Figure 3-12).
Tip
Use a descriptive name that clearly distinguishes the service from other services in
the cluster.
Figure 3-12. Adding a Cluster Service
4. If you want to restrict the members on which this cluster service is able to run, choose
a failover domain from the Failover Domain drop-down box. (Refer to Section 3.8
Configuring a Failover Domain for instructions on how to configure a failover do-
main.)
5. Autostart This Service checkbox — This is checked by default. If Autostart This
Service is checked, the service is started automatically when a cluster is started and
running. If Autostart This Service is not checked, the service must be started man-
ually any time the cluster comes up from stopped state.
63
Advertisement
Table of Contents
