Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual page 74

58 Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
Figure 3-11. Failover Domain Configuration: Adjusting Priority
b. For each node that requires a priority adjustment, click the node listed in the
Member Node/Priority columns and adjust priority by clicking one of the
Adjust Priority arrows. Priority is indicated by the position in the Member
Node column and the value in the Priority column. The node priorities are
listed highest to lowest, with the highest priority node at the top of the Member
Node column (having the lowest Priority number).
7. Click Close to create the domain.
8. At the Cluster Configuration Tool, perform one of the following actions depending
on whether the configuration is for a new cluster or for one that is operational and
running:
New cluster — If this is a new cluster, choose File => Save to save the changes to
•
the cluster configuration.
Running cluster — If this cluster is operational and running, and you want to
•
propagate the change immediately, click the Send to Cluster button. Clicking
Send to Cluster automatically saves the configuration change. If you do not want
to propagate the change immediately, choose File => Save to save the changes to
the cluster configuration.