Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual page 61

Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
1. Click Fence Devices. At the bottom of the right frame (labeled Properties), click
the Add a Fence Device button. Clicking Add a Fence Device causes the Fence
Device Configuration dialog box to be displayed (refer to Figure 3-6).
Figure 3-6. Fence Device Configuration
2. At the Fence Device Configuration dialog box, click the drop-down box under Add
a New Fence Device and select the type of fence device to configure.
3. Specify the information in the Fence Device Configuration dialog box according to
the type of fence device. Refer to the following tables for more information.
Field
Name
IP Address
Login
Password
Table 3-1. Configuring an APC Fence Device
Description
A name for the APC device connected to the cluster.
The IP address assigned to the device.
The login name used to access the device.
The password used to authenticate the connection to the device.
45