Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual page 165

Appendix B. Selectively Installing Red Hat Cluster Suite Packages
2. Run
up2date --installall --channel Label
following example shows running the command for i386 RPMs:
# up2date --installall --channel rhel-i386-as-4-cluster
3. (Optional) If you are installing Red Hat GFS, run
--channel Label
command for i386 RPMs:
# up2date --installall --channel rhel-i386-as-4-gfs-6.1
B.1.2. Custom RPM Installation
Custom RPM installation consists of the following steps:
1. Determine which RPMs to install. For information on determining which RPMs to
install, refer to Section B.1.2.1 Determining RPMs To Install.
2. Install the RPMs using the
using the
rpm
Note
If you are installing the GFS RPMs, you must install Red Hat Cluster Suite before Red
Hat GFS.
B.1.2.1. Determining RPMs To Install
Determining which RPMs to install is based on the following criteria:
The lock manager Red Hat Cluster Suite is using — either DLM or GULM
•
The Red Hat Cluster Suite and Red Hat GFS functions you are using (besides the stan-
•
dard functions)
Whether to include development libraries
•
The type of kernel (or kernels) is installed
•
Use the following tables for determining which RPMs to install:
Table B-1 — For Red Hat Cluster Suite with DLM
•
Table B-2 — For Red Hat Cluster Suite with GULM
•
for Red Hat GFS. The following example shows running the
rpm
utility, refer to Section B.1.2.2 Installing Packages with the
utility. For information about installing the RPMs
for Red Hat Cluster Suite. The
up2date --installall
rpm
149
Utility.