Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual page 166

150
Table B-3 — For Red Hat GFS
•
The tables contain the following information to assist you in determining which packages
to install:
RPMs — The names of the RPMs (excluding revision numbers)
•
Inclusion — The tables provide the following information about whether an RPM should
•
be included in the installation:
Req: Required RPM — You must install the RPM.
•
Opt: Optional RPM — Refer to the "Purpose" for more information about determining
•
whether to include the RPM.
Dev: Development RPM — Used for development purposes. Refer to the "Purpose"
•
for more information about determining whether to include the RPM.
Purpose — Provides a concise description of the RPM purpose. Assists in determining
•
which RPMs to include other than the required RPMs.
To determine which RPMs to include in the installation, perform the following steps:
1. Determine whether you are installing Red Hat Cluster Suite with DLM or Red Hat
Cluster Suite with GULM.
a. If you are installing Red Hat Cluster Suite with DLM, refer to Table B-1 to
identify which RPMs are required, optional, and for development.
b. If you are installing Red Hat Cluster Suite with GULM, refer to Table B-2 to
identify which RPMs are required, optional, and for development.
2. If you are installing Red Hat GFS, refer to Table B-3 to identify which RPMs are
required, optional, and for development.
3. With the information gathered in the previous steps, proceed to install the RPMs
using the procedures in Section B.1.2.2 Installing Packages with the
Appendix B. Selectively Installing Red Hat Cluster Suite Packages
Utility.
rpm