Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual page 64

48 Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
Field
IP Address
Login
Password
Table 3-10. Configuring an Intelligent Platform Management Interface (IPMI)
Field
Name
Table 3-11. Configuring Manual Fencing
Note
Manual fencing is not supported for production environments.
Field
Name
IP Address
Login
Password
Table 3-12. Configuring a McData Fibre Channel Switch
Field
Name
Device
Port
Table 3-13. Configuring an RPS-10 Power Switch (two-node clusters only)
Description
The IP address assigned to the IPMI port.
The login name of a user capable of issuing power on/off
commands to the given IPMI port.
The password used to authenticate the connection to the IPMI port.
Description
A name to assign the Manual fencing agent. Refer to
(8) for more information.
fence_manual
Description
A name for the McData device connected to the cluster.
The IP address assigned to the device.
The login name used to access the device.
The password used to authenticate the connection to the device.
Description
A name for the WTI RPS-10 power switch connected to the cluster.
The device the switch is connected to on the controlling host (for
example,
/dev/ttys2
The switch outlet number.
).