Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual page 57

Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
#system-config-cluster
a. If this is the first time you have started the Cluster Configuration Tool, the
program prompts you to either open an existing configuration or create a new
one. Click Create New Configuration to start a new configuration file (refer
to Figure 3-3).
Figure 3-3. Starting a New Configuration File
Note
The Cluster Management tab for the Red Hat Cluster Suite management
GUI is available after you save the configuration file with the Cluster Con-
figuration Tool, exit, and restart the the Red Hat Cluster Suite management
GUI (
status of the cluster service manager, cluster nodes, and resources, and
shows statistics concerning cluster service operation. To manage the clus-
ter system further, choose the Cluster Configuration tab.)
b. For a new configuration, a Lock Method dialog box is displayed requesting
a choice of either the GULM or DLM lock method (and multicast address for
DLM).
system-config-cluster
). (The Cluster Management tab displays the
41