Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual page 174

Appendix C.
158
DM-MP works with a variety of storage arrays. It
auto-configures the following storage arrays:
o 3PARdata VV
o Compaq HSV110
o Compaq MSA1000
o DDN SAN DataDirector
o DEC HSG80
o EMC SYMMETRIX
o EMC CLARiiON
o FSC CentricStor
o HITACHI DF400
o HITACHI DF500
o HITACHI DF600
o HP HSV110
o HP HSV210
o HP A6189A
o HP Open-
o IBM 3542
o IBM ProFibre 4000R
o NETAPP
o SGI TP9100
o SGI TP9300
o SGI TP9400
o SGI TP9500
o STK OPENstroage D280
o SUN StorEdge 3510
o SUN T4
Storage arrays not included in the list may require entries in the
/etc/multipath.conf file.
NOTE: Some storage arrays require special handling of I/O errors and
path-group switching. Those require separate hardware handler
kernel modules.
Terms and Concepts
---------------------
Hardware Handler:
A kernel module that performs hardware-specific actions when
switching path groups and dealing with I/O errors.
Path:
The connection from an HBA port to a storage controller port for
a LUN. Each path appears as a separate device. Paths can be in
various states (refer to "Path States").
Multipath-usage.txt
File for Red Hat Enterprise Linux 4
Update 3