Adding And Deleting Members - Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual

Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
Field
Name
IP Address
Login
Password
Table 3-14. Configuring a QLogic SANBox2 Switch
Field
Name
IP Address
Password
Table 3-15. Configuring a Vixel SAN Fibre Channel Switch
Field
Name
IP Address
Password
Table 3-16. Configuring a WTI Network Power Switch
4. Click OK.
5. Choose File => Save to save the changes to the cluster configuration.

3.7. Adding and Deleting Members

The procedure to add a member to a cluster varies depending on whether the cluster is
a newly-configured cluster or a cluster that is already configured and running. To add a
member to a new cluster, refer to Section 3.7.1 Adding a Member to a Cluster. To add
a member to an existing cluster, refer to Section 3.7.2 Adding a Member to a Running
Cluster. To delete a member from a cluster, refer to Section 3.7.3 Deleting a Member from
a Cluster.
Description
A name for the SANBox2 device connected to the cluster.
The IP address assigned to the device.
The login name used to access the device.
The password used to authenticate the connection to the device.
Description
A name for the Vixel switch connected to the cluster.
The IP address assigned to the device.
The password used to authenticate the connection to the device.
Description
A name for the WTI power switch connected to the cluster.
The IP address assigned to the device.
The password used to authenticate the connection to the device.
49