Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual page 62

46 Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
Field
Name
IP Address
Login
Password
Table 3-2. Configuring a Brocade Fibre Channel Switch
Field
IP Address
Login
Password
Table 3-3. Configuring a Bull Platform Administration Processor (PAP) Inter-
face
Field
Name
IP Address
Login
Password
Table 3-4. Configuring a Dell Remote Access Controller/Modular Chassis
(DRAC/MC) Interface
Field
Name
CServer
Table 3-5. Configuring an Egenera BladeFrame
Description
A name for the Brocade device connected to the cluster.
The IP address assigned to the device.
The login name used to access the device.
The password used to authenticate the connection to the device.
Description
The IP address assigned to the PAP console.
The login name used to access the PAP console.
The password used to authenticate the connection to the PAP
console.
Description
The name assigned to the DRAC.
The IP address assigned to the DRAC.
The login name used to access the DRAC.
The password used to authenticate the connection to the DRAC.
Description
A name for the BladeFrame device connected to the cluster.
The hostname (and optionally the username in the form of
username@hostname) assigned to the device. Refer to the
fence_egenera(8) man page.