Naming The Cluster - Red Hat CLUSTER SUITE - CONFIGURING AND MANAGING A CLUSTER 2006 Manual

Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
Figure 3-5. The Cluster Configuration Tool

3.5. Naming The Cluster

Naming the cluster consists of specifying a cluster name, a configuration version (optional),
and values for Post-Join Delay and Post-Fail Delay. Name the cluster as follows:
1. At the left frame, click Cluster.
2. At the bottom of the right frame (labeled Properties), click the Edit Cluster Prop-
erties button. Clicking that button causes a Cluster Properties dialog box to be
displayed. The Cluster Properties dialog box presents text boxes for Name, Con-
fig Version, and two Fence Daemon Properties parameters: Post-Join Delay and
Post-Fail Delay.
3. At the Name text box, specify a name for the cluster. The name should be descrip-
tive enough to distinguish it from other clusters and systems on your network (for
example, nfs_cluster or httpd_cluster). The cluster name cannot exceed
15 characters.
43