Adding And Deleting Members; Adding A Member To A Cluster - Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0 Configuration Manual

Figure 5.4. Fence Device Configuration
2. At the Fence Device Configuration dialog box, click the drop-down box under Add a New
Fence Device and select the type of fence device to configure.
3. Specify the information in the Fence Device Configuration dialog box according to the type
of fence device. Refer to
fence device parameters.
4. Click OK.
5. Choose File => Save to save the changes to the cluster configuration.

5. Adding and Deleting Members

The procedure to add a member to a cluster varies depending on whether the cluster is a
newly-configured cluster or a cluster that is already configured and running. To add a member
to a new cluster, refer to
existing cluster, refer to
member from a cluster, refer to

5.1. Adding a Member to a Cluster

To add a member to a new cluster, follow these steps:
1. Click Cluster Node.
Appendix B, Fence Device Parameters
Section 5.1, "Adding a Member to a
Section 5.2, "Adding a Member to a Running
Section 5.3, "Deleting a Member from a
Adding and Deleting Members
for more information about
Cluster". To add a member to an
Cluster". To delete a
Cluster".
61