Naming The Cluster - Red Hat Cluster for Enterprise Linux 5 Configuration

Figure 4.2. Creating A New Configuration
4. When you have completed entering the cluster name and other parameters in the New
Configuration dialog box, click OK. Clicking OK starts the Cluster Configuration Tool,
displaying a graphical representation of the configuration (Figure 4.3, "The Cluster Config-
uration Tool").
Figure 4.3. The Cluster Configuration Tool

3. Naming The Cluster

Naming the cluster consists of specifying a cluster name, a configuration version (optional), and
values for Post-Join Delay and Post-Fail Delay. Name the cluster as follows:
1. At the left frame, click Cluster.
2. At the bottom of the right frame (labeled Properties), click the Edit Cluster Properties but-
ton. Clicking that button causes a Cluster Properties dialog box to be displayed. The
3. Naming The Cluster
39