Table of Contents
Advertisement
Exiting RMS CodeCrafter
You've created a device template, implemented said template into a project file and then used RMS
CodeCrafter to generate the inclusion file code. Now you would like to close the project file and
exit RMS CodeCrafter.
Adjusting RMS CodeCrafter
Changing Visual Style
To change the appearance of RMS CodeCrafter:
Select View > Visual Styles and select from the following
Web Update
Newer versions of RMS CodeCrafter can now be acquired via the internet. The Web Update utility
accesses the AMX web site with the application ID and version number and searches for updates.
1. Go to Help > Web Update to check for updates.
2. If updates are available for the installed version of RMS CodeCrafter they are downloaded at
this time.
3. After the download is complete Web Update closes RMS CodeCrafter and the updates are
added.
If you do not have Web Update installed, you receive a window indicating where it can be
downloaded.
Setting Template Folder Destination
You can create persistent templates for monitored devices, where you provide the settings and
parameters. RMS CodeCrafter can then use the device templates for similar or the same devices in
other projects.
RMS CodeCrafter will only look in this folder destination for devices, and templates are saved in
this target location by default. If you save your templates in a location other than what is listed here,
RMS CodeCrafter will not find them.
1. With RMS CodeCrafter open to the Introductory page, click Edit Preferences to open the
Preferences window.
2. In the Template Folder field, either type or click Browse to set the target location.
3. Click OK.
RMS CodeCrafter
Select File > Exit. If you have not already saved you are prompted to do so at this time.
Default
Office XP®
Office 2003®
Basic Operations
71
Advertisement
Table of Contents
