Button_Event Block - AMX RMS CODECRAFTER Instruction Manual

}
}

BUTTON_EVENT Block

RMS CodeCrafter generates a BUTTON_EVENT block for each device with button mappings. It
does not make use of the i!-ConnectLinx variables defined in the variables section. An example
block is provided below.
(*******************************************)
(* BUTTON: i!-ConnectLinx Engine
(*******************************************)
BUTTON_EVENT[vdvCLActions,nchCLButtons]
{
PUSH:
DO_PUSH(dvTP1a,nchCLPanelButtons[GET_LAST(nchCLButtons)])
}
RMS CodeCrafter
SEND_COMMAND DATA.DEVICE,'ADD STD-1061-1065'
// Blinds
// Blinds Open (1095)
// Blinds Close (1096)
SEND_COMMAND DATA.DEVICE,'ADD STD-1095-1096'
// VCR - VHS
// VCR Play (1131)
// VCR Stop (1132)
// VCR Pause (1133)
// VCR Fast Forward (1134)
// VCR Rewind (1135)
// VCR Search Fwd (1136)
// VCR Search Rev (1137)
SEND_COMMAND DATA.DEVICE,'ADD STD-1131-1137'
// DVD
// DVD Play (1221)
// DVD Stop (1222)
// DVD Pause (1223)
// DVD Skip Forward (1224)
// DVD Skip Back (1225)
// DVD Search Fwd (1226)
// DVD Search Rev (1227)
SEND_COMMAND DATA.DEVICE,'ADD STD-1221-1227'
// CD Player
// CD Play (1731)
// CD Stop (1732)
// CD Pause (1733)
// CD Skip Forward (1734)
// CD Skip Back (1735)
// CD Search Fwd (1736)
// CD Search Rev (1737)
SEND_COMMAND DATA.DEVICE,'ADD STD-1731-1737'
*)
Code Generation
83