Add/Edit Named Devices Window; Add All Welcome And Main Panels Window - AMX RMS CODECRAFTER Instruction Manual

RMS CodeCrafter MeetingManager Project Pages

Add/Edit Named Devices Window

FIG. 18 Add/Edit Named Devices Window
The Add/Edit Named Devices window is available to add and edit named devices. The fields you
can edit are as follows:
Device - Drop down lists of devices available. This field is populated by devices extracted from the
integrated NetLinx file. You can select an existing device, enter a new device, or enter a D:P:S
address. If you select an existing device or enter a new device, a warning for the device is added to
the generated code file.
Logical Name - A text field you can edit to name the device.
OK - Accepts changes and closes window.
Cancel - Closes window and does not keep changes.

Add All Welcome and Main Panels Window

When you click Add all Welcome and Main Panels RMS CodeCrafter searches the existing Main
and Welcome panels for MeetingManager devices that are not already listed on the Named Devices
list. All devices found are compiled into a list and appear in the Add All Welcome and Main Panels
window. Within this window you can select any, all or none for your use. In the event no devices are
found, this window will inform you none were found.
The grid list is all MeetingManager devices found in the Main and Welcome panels. Any entry not
selected with a check is not included in the project. The Device column is the device name and the
Logical Name column is the associated name for that device. RMS CodeCrafter uses the panel
description for the logical name, it can be changed after you add it to the list (Add/Edit Named
Devices).
OK - Accepts changes and closes window.
Cancel - Closes window and does not keep changes.
RMS CodeCrafter 27