AMX RMS CODECRAFTER Instruction Manual page 16

RMS CodeCrafter Device Template Pages
Template Name - This is the template name provided by you. This is not the file name but by
default it will be used as such when saving. Template name is displayed as a selection when you are
associating new monitored devices with an existing template.
Manufacturer - This is a text field where you can provide the manufacturer information for the
device.
Model - This is a text field where you can provide the model information for the device.\
Uses Communications Module? - Place a check in the box to enable the function. The template
will use a communication module.
Communication Timeout - Measured in 1/10ths of a second, where 0 is a valid value. If no
timeout is required, use -1.
Control Failure Detect - Placing a check in the box adds a call to RMSEnablePowerFailure() in
the generated code file.
Support Module - Click the radio button that best represents the device for the template.
Next - Progresses the wizard to the Device Template Parameters page.
8
Projector
Transport
Basic
Slide Projector
None
RMS CodeCrafter