AMX RMS CODECRAFTER Instruction Manual page 41

Threshold Hold - select from the following:
Value - A text field you can edit to set threshold value. 32-bit signed number for Number, 16-bit
unsigned number for Index and any string up to 100 characters for String and Enum.
Reset Value - A text field you can edit to set reset value. 32-bit signed number for Number, 16-bit
unsigned number for Index and any string up to 100 characters for String and Enum.
Trigger - select one of the following:
Use Range (Number) - Sets the minimum and maximum for number; this value is optional.
Set Range (Enum or Index) - A drop down list of enumeration strings. You can elect to:
OK - Closes the window and saves changes made.
Cancel - Closes window without implementing changes.
RMS CodeCrafter
Help Request
Maintenance
Equipment Usage
None
Less Than
Less Than or Equal To
Greater Than
Greater Than or Equal To
Equal To
Not Equal To
Contains (String or Enum only)
Does Not Contain (String or Enum only)
Reset - Place a mark in the box to enable reset of threshold.
None
Button
Channel
Level
Add - adds the sting to the parameter use.
Remove - removes the string from parameter use.
Move Up - moves the string up the list of parameter use.
Move Down - moves the string down the list of parameter use.
RMS CodeCrafter MeetingManager Project Pages
33