Opening An Existing Project; Closing A Project Or Template File; Importing Rms Sdk Spreadsheets - AMX RMS CODECRAFTER Instruction Manual

Hide thumbs Also See for RMS CODECRAFTER:

Table of Contents

Opening An Existing Project

If you have already created a project (.CGP) and would like to use it as a starting point, follow these

steps:

1. With the RMS CodeCrafter wizard open to the Introductory page, click Open Project.

2. In the Open RMS CodeCrafter Project window, navigate to your project and click Open.

You can now begin working from your saved project.

Once you are done with a project or template file, but would like to keep RMS CodeCrafter open,

you can close the file. To close a file:

Earlier releases of RMS SDK utilized an Excel spreadsheet that RMS CodeCrafter now replaces.

You can import your device and parameter information from the Excel spreadsheet into RMS

CodeCrafter.

1. Select File > Open > Import Spreadsheet.

2. Browse to your desired .XLS file and click Open.

RMS CodeCrafter

Select File > Close. If you have not already saved your file you are prompted to do so at

this time.

Basic Operations

Table of Contents

Do you have a question about the RMS CODECRAFTER and is the answer not in the manual?