Add/Edit Main Panel Window - AMX RMS CODECRAFTER Instruction Manual

RMS CodeCrafter MeetingManager Project Pages
The main panel grid lists all panels available for the project. Any entry not selected with a check
will be removed from the project upon closing the project.
Previous - Regresses the RMS CodeCrafter wizard to the RMS Virtual and Socket Device
Definitions page.
Next - Progresses the RMS CodeCrafter wizard to the Scheduling: Welcome Panels page.

Add/Edit Main Panel Window

FIG. 14 Add/Edit Main Panel Window
The Add/Edit Main Panel window is available to add and edit panel information. The fields you can
edit are as follows:
Panel Size - A list of supported panel sizes supported by RMS CodeCrafter, click on your desired
panel size to select.
Description - A text field you can edit to describe the panel.
Base Device - Drop down lists of devices available. This field is populated by devices extracted
from the integrated NetLinx file. You can select an existing device, enter a new device, or enter a
D:P:S address. If you select an existing device or enter a new device, a warning for the device is
added to the generated code file.
MeetingManager Pages - Drop down lists of devices available. This field is populated by devices
extracted from the integrated NetLinx file. You can select an existing device, enter a new device, or
enter a D:P:S address. If you select an existing device or enter a new device, a warning for the
device is added to the generated code file.
Keyboard Device - Drop down lists of devices available. This field is populated by devices
extracted from the integrated NetLinx file. You can select an existing device, enter a new device, or
RMS CodeCrafter 23