Add/Edit Monitored Devices Window - AMX RMS CODECRAFTER Instruction Manual

Hide thumbs Also See for RMS CODECRAFTER:

Table of Contents

RMS CodeCrafter AssetManager Project Pages

Add Device - Launches the Add/Edit Monitored Device window. Adds a monitored device to the

project.

Edit Device - Launches the Add/Edit Monitored Device window. When a monitored device is

selected you can edit its properties.

Add Device from Template - Launches the Add Device from Template window. Adds a device

using a device template.

The monitored device grid lists all devices available for the project. Any entry not selected with a

check will be removed from the project upon closing the project.

Previous - Regresses the RMS CodeCrafter wizard to the Named NetLinx Devices Page.

Next - Progresses the RMS CodeCrafter wizard to the Device Parameters Page.

Add/Edit Monitored Devices Window

FIG. 40 Add/Edit Monitored Devices Window

The Add/Edit Monitored Devices window is available to add and edit named devices. The fields

you can edit are as follows:

Device - Drop down lists of devices available. This field is populated by devices extracted from the

integrated NetLinx file. You can select an existing device, enter a new device, or enter a D:P:S

address. If you select an existing device or enter a new device, a warning for the device is added to

the generated code file.

RMS CodeCrafter

Table of Contents

Do you have a question about the RMS CODECRAFTER and is the answer not in the manual?