The Rms Codecrafter Work Area; Menu Bar; File Menu; Edit Menu - AMX RMS CODECRAFTER Instruction Manual

The RMS CodeCrafter Work Area

Menu Bar

File Menu

The File menu serves as a location for file management, project information and template
management.
New - Choose between:
Open - Choose between:
Close - Closes the project or template file currently open. If the file has been edited, or is "dirty" as
indicated at the top of the window with an asterisks next to the file name, you are prompted to save
changes before closing.
Save - Saves changes made to either project or template file currently open. If the file has not been
previously been saved you are prompted to name and designate where to save the file.
Transfer Server Address File - Opens the SERVERINFO.TXT window.
Save As - Opens the save file dialog, allowing you to specify the file name and location which to
save.
Most Recently Used List - A list of most recently opened file names.
Exit - Closes the RMS CodeCrafter Wizard.

Edit Menu

The Edit Menu applies to text changes made within the RMS CodeCrafter wizard.
Undo - Undoes action taken in text areas.
Cut - Cut highlighted text from fields.
Copy - Copy highlighted text within fields.
Paste - Paste cut and copied text into selected fields.
Delete - Delete selected text within fields.
Preferences - Launches the Preferences window.
RMS CodeCrafter
New Project - Opens a new RMS CodeCrafter project file (.CGP) and progresses to the
Project Start Page.
New Template - Opens a new RMS CodeCrafter template file (.CGT) and progresses to
the Device Template Main Page.
Open Project - After selecting the desired file in the open dialog window, it opens an
existing RMS CodeCrafter project file (.CGP) and progresses to the Project Start Page.
Open Template - After selecting the desired file in the open dialog window, it opens an
existing RMS CodeCrafter template file (.CGT) and progresses to the Device Template
Main Page.
The RMS CodeCrafter Work Area
3