Packs; Default Presets On The Dimmer Packs - AMX PRO-DP8 DECOR PROLINK FLUSH MOUNT KEYPAD PANEL Instruction Manual

Product Information

Packs

Packs refer to the Dimmer Control Cards (such as the RDD-DM4/DM6) and/or Integrated Dimmer
Modules (such as the RDC-DC/PDC). Each LED on the PRO-DP8 zone/channel LED indicator
represents one lighting channel/zone.
The PRO-DP8 controls up to 3 Packs; each individual Pack housing up to 6 lighting channels. Each
Pack is connected to the PRO-DP8 via PROlink cable. The PROlink cable provides power to the
PRO-DP8 panel, and communication between the panel and pack(s).
DIP switch positions 4 and 5 (on the rear panel DIP switch) determine which Pack(s) are being
controlled by each PRO-DP8 panel. Configure these switches to control either Pack 1, Pack 2, or
combinations of Packs 1 and 2, or Packs 2 and 3.
!

Default presets on the dimmer packs

Radia Dimmer Cards and Integrated Dimmer Control Cards (Packs) have 8 contact closures, pre-
programmed with default presets. By default, the dimmer packs ship with the following presets for
each contact closure:
Dry Closure Default Presets
Contact Closure Default Function
1
2
3
4
5
6
7
8
*All other channels are undefined
4
For information on configuring the DIP switch for multiple Pack assignments, refer to the
Using Switches 4 and 5 to Specify Which Pack(s) to Control section on page 16.
Channel 1 at 100% in 1 second*
Channel 2 at 100% in 1 second*
Channel 3 at 100% in 1 second*
Channel 4 at 100% in 1 second*
Channel 5 at 100% in 1 second*
Channel 6 at 100% in 1 second*
Pack on (channels 1-6)*
Pack on (channels 1-6)*
PRO-DP8 Decor 8-Button Wall Panel