Setting The Level Code - AMX AXP-PLV POSITRACK PILOT VIDEO TOUCH PANEL Instruction Manual

Setting the level code

Level buttons set the device and number codes for the touch panels.
Joysticks actually use two level numbers. The first is for the X-axis and the second is
for the Y-axis. You only need to specify the first level.
1. Press DEV to open a keypad and set the device number.
2. Enter 1, 2, 3, or 4 in the keypad. The programming software uses device codes
1 - 4 to identify the touch panel.
3. Press ENTER to save the level device number, close the keypad, and return to the Button
Properties page.
4. Press NUM to open a keypad and set the level number assigned to the device.
5. Enter a number 1 – 8. Each device can have from 1 – 8 levels except joysticks, where the range
is 1 – 7.
6. Press ENTER to save, close the keypad, and return to the Button Properties page.
AXP-PLV PosiTrack Pilot Video Camera Controller
Designing Touch Panel Pages
17