Programming
Video Send_Commands (Cont.)
@VSD
Sets the video
default settings
(brightness, con-
trast, saturation,
hue).
@VST
Sets the video sig-
nal saturation.
AXP-AI8 Send_Commands
An AXP-AI8 is located within the AXP-PLV. These commands are necessary for turning channel
delta modes ON and OFF. Delta mode compensates for level changes in continuous rotation
potentiometers and should be turned ON for iris and focus knobs in the AXP-PLV.
Send_Commands
SEND COMMAND AI8,"'DELTA5 ON'"
or
SEND COMMAND AI8,"'DELTA5'"
SEND COMMAND AI8,"'DELTA7 ON'"
or
SEND COMMAND AI8,"'DELTA7'"
SEND COMMAND AI8,"'DELTA5 OFF'"
SEND COMMAND AI8,"'DELTA7 OFF'"
26
Syntax:
"'@VSD'"
Variables:
data = 0 (min) - 255 (max)
Example:
SEND_COMMAND TP,"'@VSD'"
Sets the incoming video values to their default settings.
Syntax:
"'@VST<data>'"
Variables:
data = 0 (min) - 255 (max)
Example:
SEND_COMMAND TP,"'@VST 128'"
Sets the video saturation to 128.
Puts channel 5 in delta mode. (Iris)
Puts channel 7 in delta mode. (Focus)
Takes channel 5 out of delta mode.
Takes channel 7 out of delta mode.
AXP-PLV PosiTrack Pilot Video Camera Controller