Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Norton Clipper C3530SS
Summarization of Contents
SAFETY
SAFETY MESSAGE / ALERT SYMBOLS
Explains DANGER, WARNING, CAUTION, NOTICE symbols and their meanings.
SAFETY WARNINGS
Details SILICA DUST WARNING and CALIFORNIA PROPOSITION 65 MESSAGE, including health risks.
RULES FOR SAFE OPERATION
Provides crucial safety guidelines for operating the machine, including general and transportation safety.
SAW BLADE SAFETY
Covers safe practices for blade installation, selection, and operation, referencing ANSI standards.
OPERATION & SAFETY DECALS
Identifies and illustrates various safety decals found on the saw for operator awareness.
SAFETY DECAL LOCATIONS
Maps the placement of safety decals on the machine and lists their descriptions and locations.
CONSOLE DECAL LOCATIONS
Shows the location of decals on the operator's console and their associated labels.
CONSOLE CONTROL DESCRIPTIONS
Details the function and purpose of each control and indicator on the operator's console.
PRODUCT SPECIFICATIONS
SAW FEATURES
Lists key design and functional features of the Norton Clipper C35 Self Propelled Flat Saw.
TECHNICAL SPECIFICATIONS
Provides detailed technical data and dimensions for different models of the saw.
SAW DIMENSIONS
Lists various physical dimensions of the saw, including height, length, and width.
INSPECTION & START-UP
PRE-OPERATION CHECKLIST
Outlines essential checks to perform before starting the machine for safe operation.
SCHEDULE MAINTENANCE QUICK REFERENCE
Provides a summary of maintenance tasks based on operating hours.
OPERATION
BLADE MOUNTING INSTRUCTIONS
Step-by-step guide on how to safely remove and install the saw blade, including guard removal.
BLADE MOUNTING INSTRUCTIONS CONTINUED
Continues instructions for tightening the arbor bolt, installing the blade guard, and important RPM warnings.
STARTING ENGINE
Detailed procedure for starting the engine, including pre-start checks and operating instructions.
SAW GUIDE ALIGNMENT AND ADJUSTMENT
Explains how to align the front and rear pointers with the blade for accurate cutting.
MANEUVERING THE SAW
Covers safe practices for moving the saw, including dry cutting and wet cutting guidelines.
SPEED CONTROL-LEVER USE AND ADJUSTMENT
Describes how to operate the speed control lever for forward and reverse movement.
ENGAGING THE DRIVE UNIT
Details how to engage and disengage the hydrostatic transmission using the FNR lever and engagement handle.
WATER HOOK UP
Instructions for connecting the water supply for blade cooling and dust suppression.
DEPTH INDICATOR
Explains how to set and use the depth indicator for controlling cutting depth.
MAINTENANCE
ENGINE
Emphasizes the importance of engine maintenance and pre-checks for optimal operation and longevity.
AIR CLEANER
Instructions for cleaning and maintaining the air cleaner due to dusty operating conditions.
ARBOR, AXLE, DRIVE UNIT AND WHEEL BEARINGS
Guidance on greasing critical components like the blade shaft, axle, drive unit, and wheel bearings.
HYDROSTATIC DRIVE UNIT
Information on checking and maintaining the hydrostatic transmission fluid level and type.
MAINTENANCE SCHEDULE
A detailed schedule outlining daily, 25-hour, 50-hour, and 250-hour maintenance tasks.
TROUBLESHOOTING
A comprehensive guide to diagnosing and resolving common problems with the transmission and engine.
STEP CUTTING
STEP CUTTING
Instructions for performing deep cuts in incremental steps for safety and efficiency.
Need help?
Do you have a question about the Clipper C3530SS and is the answer not in the manual?
Questions and answers