KYMCO GRAND DINK 125 Service Manual page 139

12
. COOLING SYSTEM
WATER PUMP SHAFT REMOVAL
Disconnect the water hose from the right
crankcase cover.
Remove the 3 bolts attaching the water
pump assembly.
Remove the water pump assembly, gasket
and dowel pins.
Remove the water pump bearing snap ring
from the water pump assembly.
Remove the water pump shaft and shaft
inner bearing.
Remove the water pump shaft outer
bearing.
12-11
Bolts
Water Pump Assembly
Water Pump Assembly
Snap Ring
Water Pump Shaft
Inner Bearing
GRAND DINK 125/150
Inner Bearing
Water Pump Shaft