3
. INSPECTION/ADJUSTMENT
ENGINE OIL
OIL LEVEL INSPECTION
Stop the engine and support the motorcycle
upright on level ground.
Wait for 2
3 minutes and check the oil
level with the dipstick. Do not screw in the
dipstick when making this check.
OIL CHANGE
• Drain the oil while the engine is warm.
Remove the oil drain bolt to drain the engine
oil.
Install the aluminum washer and tighten the
oil drain bolt.
Torque: 14.7N-m
• Replace the aluminum washer with a
new one if it is deformed or damaged.
Pour the recommended oil through the oil
filler hole.
Oil Capacity:
At disassembly: 1.1 liter
At change: 0.9 liter
Recommended Oil:
SAE: 15W40#
API: SJ
Start the engine and check for oil leaks.
Stop the engine and recheck the oil level.
OIL FILTER SCREEN INSPECTION
Drain the engine oil.
Remove the oil filter screen cap.
Clean the oil filter screen.
Install the oil filter screen, and filter screen
cap.
Fill the engine with recommended engine oil.
GRAND DINK 125/150
Oil Dipstick
Oil Filter Screen Cap
Oil Filter Screen Cap
Oil Filter Screen
3-4