KYMCO GRAND DINK 125 Service Manual page 70

6
. CYLINDER HEAD/VALVES
Remove the camshaft gear from the cam chain
to remove the camshaft.
CAMSHAFT INSPECTION
Check each cam lobe for wear or damage.
Measure the cam lobe height.
Service Limits:
SH30DA IN: 30.75mm replace if below
SH25DA EX:30.26mm replace if below
Check each camshaft bearing for play or
damage. Replace the camshaft assembly with
a new one if the bearings are noisy or have
excessive play.
CAMSHAFT HOLDER DISASSEMBLY
Take out the valve rocker arm shafts using a
6mm bolt.
Remove the valve rocker arms.
6-5
GRAND DINK 125/150
Cam Chain
Camshaft Gear
Camshaft Bearings
Valve Rocker Arms
Rocker Arm Shafts
6mm Bolt