KYMCO GRAND DINK 125 Service Manual page 99

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
CLUTCH ASS EMBLY
Install the damper rubbers on the drive plate
pins.
Install the clutch weights/shoes and clutch
springs onto the drive plate.
Install the retainer plate and secure with the
circlips.
CLUTCH/DRIVEN PULLEY AS SEMBLY
Clean the pulley faces and remove any grease
from them.
Apply grease to the O-rings and install them
onto the moveable driven face.
8-13
GRAND DINK 125/150
Circlips
Drive Plate
Movable Driven Face