KYMCO GRAND DINK 125 Service Manual page 140

12
. COOLING SYSTEM
MECHANICAL S EAL REPLACEMENT
Drive the mechanical seal out of the water
pump assembly from the inside.
Drive in a new mechanical seal using a
mechanical seal driver.
Apply sealant to the right crankcase
cover fitting surface of a new mechanical
seal and then drive in the mechanical seal.
WATER PUMP SHAFT INS TALLATION
Drive a new water pump shaft outer bearing
into the water pump assembly from the
inside.
Water Pump Assembly
Mechanical Seal (Water Seal)
Mechanical Seal Driver
Outer Bearing
Water Pump Assembly
GRAND DINK 125/150
12-12