Rear Shock Absorber - KYMCO GRAND DINK 125 Service Manual

15
. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
INSTALLATION
The installation sequence is the reverse of
removal.
Torque:
Rear shock absorber lower mount bolt:
19.6 29.4N-m
Rear axle nut: 78.4
ADJUSTABLE REAR CUSHION
To suit scooter behaviour to load condition
rear cushion could be adjusted in spring
prelocad.
It is possible to adjust rear cushion in three
positions:
A position "soft"
B position "medium"
C position "hard"
When you adjust rear cushion, the spring
preload of rear cushions must be the same.

REAR SHOCK ABSORBER

REMOVAL
Remove the rear carrier and hand rail. ( 2-3)
Remove the met-in box. ( 2-3)
Remove the two air cleaner bolts.
Remove the rear shock absorber upper mount
bolt.
Remove the right/left rear shock absorber
upper and lower mount bolts.
Remove the right and left rear shock
absorbers.
INSPECTION
Install the rear shock absorbers in the reverse
order of removal.
Torque:
Upper Mount Bolt: 39.2N-m
Lower Mount Bolt: 19.6
15-5
98N-m
29.4N-m
GRAND DINK 125/150
Shock Absorber Lower Mount Bolt
Brake Caliper Bolts
2
1
A
Upper Mount Bolts
Upper Mount Bolts
Lower Mount Bolts
Axle Nut
C
5
4
3
B