Se
tting in TIME MISMATCH
When the time of DVR is set earlie
displayed.
Selecting "YES": the video data between "SYSTEM TIME" and "HDD LAST TIME" will be deleted.
Selecting "GO TO TEST MODE": Select only the video data between "SYSTEM TIME" and "HD
LAST TIME" must not be deleted. Otherwise, do not select "GO TO TEST MODE".
2-4. DLS (Day Light Saving) time setting: Summer time setting
1.
Go to DLS field using Up/Down arrow button and select ON using Right/L
summer time fields are displayed.
2.
Select BEGIN field using Up/Down a
displayed.
3.
Select the
date and time that is be changed using Right/Left arrow button, change a value using
Up/Down arrow button, and press the SEL button.
4.
After exit from BEGIN field setting, select END field using Up/Down ar w button and press the SEL
button. Then DLS BEGIN screen is displayed.
5.
Select the date and time that is be changed
Up/Down arrow button, and press the SEL button.
CAUTION:
-DLS can't start from 23:0
-DLS can't be applied, if the
r than the time of the last video data on HDD, the following message is
rrow button and press the SEL button. Then DLS BEGIN screen is
using Right/Left arrow button, change a value using
0
date of BEGIN and END is same.
21
eft arrow button. Then the
ro
D