Table of Contents
Advertisement
OSD CONTRAST – Set the contrast of OSD on the screen using
Setting values of the display bar: 20 (the most transparent) ~ 100
Renaming of CHANNEL
①
Select CHANNEL using
displayed.
②
Input characters using ▲▼
Available characters list:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
[ ＼ ] ^ _ ' a b c d e f g h i j k l m n o p q r s t u v w x y z
{ | } ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < > ? @
Setting of CHANNEL - Select CHANNEL to set the video setting as bellows using
DISPLAY – Select ON/OFF using
ON: The live screen of the channel is displayed.
OFF: The live screen of the channel is NOT displayed.
SEQ LIST – Select ON/OFF using
ON: The channel is included in sequencing channels.
OFF: The channel is NOT included in sequencing channels.
BNRIGHTNESS – Set the brightness of the channel using
Setting values of the display bar: 0 ~ 100 (The most brightness)
CONTRAST – Set the contrast of the channel using
Setting values of the display bar: 0 ~ 100 (The most contrast)
HUE – Set the hue of the channel using
Setting values of the display bar: 0 ~ 100
SATURATION – Set the saturation of the channel using
Setting values of the display bar: 0 ~ 100
VGA SCREEN MODE – Select the display mode of VGA monitor using
FULL: The VGA screen is displayed on the full screen of the VGA monitor.
NORMAL: The VGA screen is open displayed with the monitor screen periphery.
The DVR is rebooted automatically when VGA SCREEN MODE is changed.
ERROR ALARM – Set the alarm output when video is lost or A HDD is full using
OFF: No alarm output.
ALL: The alarm is output when a HDD error or video loss occurs.
HDD FAIL: The alarm is output when a HDD error occurs.
VIDEO LOSS: The alarm is output when video loss occurs.
buttons and press SEL button. Then the CAMERA TITLE screen is
▶◀
buttons.
▶◀
buttons.
▶◀
buttons.
▶◀
buttons.
▶◀
41
buttons.
▶◀
▶◀
buttons.
▶◀
buttons.
▶◀
buttons.
▶◀
buttons.
▶◀
▶◀
buttons
buttons.
Advertisement
Table of Contents
