Table of Contents
Advertisement
B. How to access DVR from Remote PC?
LAN Connection – Using a switching hub
Connect to the system, using a hub (Switching hub) and an Ethernet cable (10BASE-
T/100BASE-TX CAT 5 LAN cable)
1.
Run the pre-install the network client software on the supplied CD. (Refer to Chapter 6. Network
access using the Exclusive network viewer)
2.
Check the IP address from SETUP>SYSTEM>DESCRIPTION of DVR.
3.
Run network client software and click
4.
Input IP address, Port No., and Password on the connect window. And click OK.
IP Router or HUB
button.
66
Advertisement
Table of Contents
