Table of Contents
Advertisement
CLIENT ACCESS – Select ON/OFF using
ON: Remote access through client software is allowed.
OFF: Remote access through client software is NOT allowed.
BANDWIDTH SAVING – Select ON/OFF using
ON: Only a key frame is transmitted. Favorable for use of low network bandwidth.
OFF: Every frame frames are transmitted. Mostly, set "OFF" for normal use..
Setting of NETWORK TYPE - Select NETWORK TYPE using
DHCP – DVR automatically get IP varying from time to time from network.
An IP address is automatically assigned by the DHCP server, which automatically
assigns IP address and other parameters to new devices. When ADSL or other network
being used adopts variable IP method, not fixed IP. This option is used as a way to
automatically get IP address.
ADSL
①
②
③
④
⑤
⑥
Use this ADSL (PPPoE) function when the network type connected to the DVR is PPPoE
method. If ADSL type is not using inputting IP and Password like VDSL or DVR is
installed in IP sharer, a user can not select this function. In this case, a user should select
DHCP or LAN.
▶◀
Select ID using ▲▼buttons and press SEL button.
Input the registered ID that is necessary for ADSL connection using ▲▼
and press SEL button.
Select PASSWORD using ▲▼buttons and press SEL button.
Input the registered PWSSWORD that is necessary for ADSL connection using
▲▼
buttons and press SEL button.
▶◀
Press ESC button. Then the APPLY NETWORK ADDRESS screen is displayed.
Select CONFIRM using
automatically.
buttons.
buttons.
▶◀
buttons.
▶◀
buttons and press SEL button. Then the DVR reboots
▶◀
47
buttons
▶◀
Advertisement
Table of Contents
