Manual Recording; Schedule Recording - OPTICOM 4 CHANNELS MPEG-4 DIGITAL VIDEO RECORDER - V 1.2 Instruction Manual

3-4. Manual recording

①
To start manual recording, press REC button. Then, "R" is displayed on the screen and the DVR starts
recording of every channels.
②
To stop manual recording, press REC button. Then, "R" disappears on the screen and the DVR stops
recording of every channel.

3-5. SCHEDULE recording

①
Set the basic record menu using ▲▼
RESOLUTION
CHANNEL
FRAME RATE
QUALITY
Upon connecting cameras, the DVR records input video using schedule setting.
②
To select a channel for schedule recording, go to CHANNEL filed using ▲▼ button and select a channel
from CH1, CH2, CH3, and CH4 using
③
Go to RECORDING filed using ▲▼button and select SCHEDULE using
Before setting Schedule, set the followings as necessary.
MOTION ZONE
MOTION SENSITIVITY
SENSOR TYPE
PRE RECORD
POST EVENT RECORD
④
Go to SCHEDULE using ▲▼ button and press SEL button. Then SCHEDULE setting screen is displayed.
(When the channel 1 is selected from CHANNEL field, "SCHEDULE – CH1" is displayed.)
⑤
Move the cursor to one of following fields and set a different mode using SEL button.
ⓐ: Same recording mode setting apply to every day.
ⓑ: Same recording mode setting apply to the whole day.
buttons before setting Schedule.
▶◀
button. And
▶◀
25
button.
▶◀