Table of Contents
Advertisement
2-2. Live screen
During the system is booting, "INITIALIZING" message is displayed. After the system booting is finished, the
video inputs from the cameras are displayed.
Various indicators showing the status of the DVR are shown as OSD symbols. These OSD and video display
can be hidden.
Indicator
If camera is not connected or the connector is not properly connected to video input terminal,
displayed on the monitor.
Continuous recording in progress
Manual recording in progress
Sensor alarm recording in progress
Motion alarm recording in progress
Indicates that remote controller ID is set.
Indicates that motion is detected or sensor alarm input.
Indicates that alarm output is activated.
Indicates that a network client is connected to the DVR.
Indicates that sequencing mode is enabled.
Indicates the HDD is being recycled
Indicates the percentage of recorded data into HDD
Description
19
is
Advertisement
Table of Contents
