Table of Contents
Advertisement
7. Use the UP and DOWN buttons to scroll through the on-screen listings.
8. Use the LEFT and RIGHT buttons to display a list of events that happened previous to or after the
current selection.
9. Once the desired event has been selected, press SEL to start playing back the selected video.
10. Press the BACKUP button to launch the archiving function in playback mode.
4-2-2. TIME LINE Search
The TIME-LINE search window is used to find the stored video by using the time line bar.
1. Select the date of the video to begin searching by using the LEFT, RIGHT, UP and DOWN buttons to
navigate through the days.
2. Once you have selected the date, press the SEL button to move to the time line search window.
3. Use LEFT / F/ADV or RIGHT/ F/REW buttons to select a time zone on the 24 hours time table.
Note: The recording mode is indicated on the screen as below.
C: Continuous-Green
M: Motion-Yellow
S: Sensor-Red
R: Manual -Purple
1. Once you have selected the time zone, press the SEL button to move to the 60 minutes time table.
2. Select All or a specific channel to search by using the UP and DOWN arrow buttons.
3. Once you select the channel, use the LEFT / F/ADV or RIGHT/ F/REW arrow buttons to move the
time line select bar (blue) to the point you wish to start playing the video clip.
4. Press the SEL button to playback the recorded video.
Figure 4.2.2. Event search screen
31
Advertisement
Table of Contents
