Table of Contents
Advertisement
6-1. LIVE
Item
OSD
SEQUENCE
SEQ-DWELL TIME
EVENT BEEP
OSD CONTRAST
CHANNEL
DISPLAY
SEQ LIST
BRIGHTNESS
CONTRAST
HUE
SATURATION
VGA SCREEN
MODE
ERROR ALARM
OSD – Select ON/OFF using
ON: OSD ((on-screen-display) such as the time, date, the channel, and the characters and symbols
are displayed on the screen.
OFF: OSD ((on-screen-display) is NOT displayed, except recording indicator icons.
SEQUENCE – Select ON/OFF using
ON: Channel in full screen mode is rotated.
OFF: Channel on a single live screen is NOT rotated.
SEQ-DWELL TIME – Select channel sequence interval time using
Setting values: 1, 2, 3, 4, ~ 56, 57, 58, 60 seconds.
EVENT BEEP – Select ON/OFF using
ON: The internal beep sound is triggered when the event is activated.
OFF: The internal beep sound is not triggered.
Enable/disable OSD (on-screen-display).
Enable/disable sequential display of video channels in full screen mode.
Dwell time for each cannel display in sequential display mode.
Enable/Disable internal beep when motion is detected or the alarm is triggered.
Set the visibility level of the On Screen Display (OSD)
Select the channel for applying the following settings.
Enable/disable display of the video channel in live display mode
Enable/disable the specified channel to be included in sequential display mode.
Change the brightness value for the specified channel
Change the contrast value for the specified channel
Change the hue value for the specified channel
Change the saturation value for the specified channel
Select VGA screen mode as either FULL or Normal.
NOTE: If the mode is changed, the system will reboot.
Enable/Disable alarm for video loss or HDD fail.
buttons.
▶◀
buttons.
▶◀
buttons.
▶◀
Description
buttons.
▶◀
40
Advertisement
Table of Contents
